SKU:PCC-K-0021

About product

Rokopol® FS3610 is a polyether polyol in the form of a white, opaque liquid. The product contains antioxidants (excluding BHT) and is characterized by high purity and low emissions. The product has a hydroxyl number in the range of 40.0 - 45.0 mg KOH/g and has a dynamic viscosity of 700 - 900 mPas at 25°C.

Delivery time up to 14 working days.

Description Properties

Rokopol® FS3610 can be used for the production of flexible polyurethane foams using the continuous (slabstock) or batch production system. With the use of polyol and appropriately selected additives (catalysts, silicones, foaming agents), it is possible to produce blocks of cured flexible foam with a rectangular cross-section and a height of up to 130 cm. Thanks to its excellent parameters, the product can be widely used in the furniture industry for the production of mattresses and furniture requiring increased foam hardness, as well as in the automotive industry.

The main application advantages of Rokopol® FS3610:

the possibility of producing foams with densities from 16 to 80 kg/m3 with hardness ranges from 2.5 - 7kPa and flexibility up to 40%,
the use of the product allows the production of foam with a breaking strength above 60 kPa and a relative elongation at break above 50%,
the possibility of using the polyol with reactive polymeric polyols in order to, among others, increasing or decreasing foam hardness.

The most common applications of Rokopol® FS3610:

used for the production of flexible foams with increased hardness,
polyol used in the furniture industry for the production of mattresses, pillows,
a product used for the production of furniture where higher foam hardness is required.

Products manufactured on the basis of Rokopol® FS3610 are of very high quality. Thanks to the refined production process, this polyol is characterized by very good parameters and a wide range of possible applications.

Properties and applications:

high purity and low emission;
the possibility of obtaining flexible foams with very good parameters of density, flexibility and hardness;
compatibility with reactive polymeric polyols allows for the extension of application possibilities;
wide application of the product in the furniture and automotive industries;

Description Properties

Chemical name: Styrene-acrylonitrile copolymer dispersion in reactive polyether polyol
CAS number: 57913-80-1
Physical state: Liquid
Colour: White
Smell: Mild. Characteristic.
pH: Not available
Density: 1.025 g/cm³ [25°C]
Viscosity: Dynamic (room temperature): 800 mPa s

Product inquiry

To order, send a product inquiry

Chemical name: Dispersion of styrene acrylonitrile copolymer in oxyalkylated triol

Rokopol FS3610