Rokopol G1000

Rokopol® G1000 is used as a base material for the production of one-component foams (OCF), assembly foams and foam adhesives. This polyol is also used as an additive in the production of rigid foams, improving the skin texture of the foam. With the use of Rokopol® G1000, other polyether polyols and appropriately selected additives (catalysts, silicones, foaming agents), it is possible to produce one-component foam with very good properties. The product is also used in the production of elastomers. Thanks to its rich properties, the product is widely used in the construction industry.

Main application advantages of Rokopol® G1000:

• the possibility of producing one-component foams with a density in the range of 10-30 kg/m3 and a hardness in the range of 10-45 kPa,
• the use of the product allows for very good dimensional stability (shrinkage below 5%),
• very good transport of moisture in the foam and shortening of the foam cutting time to 25 minutes due to the low molecular weight,
• low content of sodium and potassium allow for a long time of use (up to 24 months) and reduce the tendency to yellowing, which allows for longer storage.

The most common applications of Rokopol® G1000:

• product intended for the production of foams suitable for every season of the year,
• used in the construction industry for the production of mounting foams for windows, doors, culverts, rings,
• the product is used as a foam adhesive for polystyrene and window sills,
• polyol used in the production of polyurethane adhesives and sealants.

Application and properties:

• the possibility of producing one-component foams with a density in the range of 10-30 kg/m3 and hardness in the range of 10-45 kPa;
• the use of the product allows for very good dimensional stability (shrinkage below 5%);
• low content of sodium and potassium allow for a long service life of up to 24 months and a limited tendency to yellowing, which allows for longer storage;
• polyol used in the construction industry for the production of polyurethane adhesives and sealants;
• used in the construction industry for the production of all-season mounting foams for windows, doors, culverts, rings;

Products manufactured on the basis of Rokopol® G1000 are of very high quality. Thanks to the refined production process, the product is characterized by very good parameters and a wide range of applications.

Chemical name: Polyether polyol, glycerine-based polyoxyalkylenetriol
CAS number: 25791-96-2
Physical state: Liquid
Color: Colorless
Smell: Mild. Characteristic.
pH: Not available
Density: 1.02 g/cm³ [25°C]
Viscosity: Dynamic (room temperature): 250 mPa s