Rokopol vTec8050

Rokopol vTec8050
SKU:PCC-K-0050
About product

Rokopol® vTec8050 is a polyether polyol. The product is a homogeneous liquid, free from mechanical impurities, which may opalize. The product contains antioxidants (excluding BHT) and is characterized by high purity and low emissions. The product has a hydroxyl number in the range of 190-210 mgKOH/g and is characterized by dynamic viscosity in the range of 350-600 mPas at 25°C.

Delivery time up to 14 business days.

Rokopol vTec8050 can be used to produce viscoelastic polyurethane foams using a continuous system (slabstock) and periodic production (batch). Using Rokopol® vTec8050 and appropriately selected additives (catalysts, silicones, foaming agents) it is possible to produce blocks of viscoelastic foam with a rectangular cross-section and a height of up to 70 cm. Thanks to its excellent parameters, the product can be widely used in the furniture industry for the production of mattresses and pillows.

Main application advantages of Rokopol® vTec8050:

  • possibility of producing foams with densities from 40 to 70 kg/m3 and hardness ranges from 1.2-6kPa,
  • the use of the product allows the production of foam with a breaking strength above 80 kPa and a relative elongation at break above 60%,
  • foam recovery time 1-10 s,
  • possibility of producing foams with open and closed cell structure,
  • excellent permanent deformation parameters enable high foam compression during transport,
  • very good foam block shape with a height of up to 60 cm,
  • possibility of producing foams of increased hardness, used in the automotive and medical industries.

The most common applications of Rokopol® vTec8050:

  • used for the production of viscoelastic polyurethane foams,
  • polyol used in the furniture industry for the production of mattresses and pillows,
  • product used for the production of gel foams.

Products manufactured on the basis of Rokopol® vTec8050 are characterized by very high quality. Thanks to the refined production process, this polyol is characterized by very good parameters and a wide range of applications.

Properties and applications:

  • high purity and low emissions;
  • the possibility of obtaining viscoelastic foams with good parameters of density, elasticity and tear resistance as well as high-quality gel foams;
  • production of foams with a high comfort factor;
  • excellent permanent deformation parameters enabling high foam compression during transport;
  • a product used in the furniture industry for the production of mattresses and pillows;
Chemical name: Polyether polyol
CAS number: -
State of matter: Liquid
Color: Colorless. Iridescent.
Smell: Mild. Characteristic.
pH: Not available
Density: 1.02 g/cm³ [25°C]
Viscosity: Dynamic (room temperature): 400 mPa s
Product inquiry
To order, send a product inquiry
Categories